info

22 July 2010

Windows 7: Create a recovery partition

This is a tip that helps you to easily create a bootable "recovery" partition:

After some testing with Windows 7, it is probably possible to create a hidden partition, allowing access to all repair tools, and the ability to completely reinstall the system,therefore no need to use DVD or USB key.


To begin with, you'll need:
  1. A PC functional
  2. A blank hard disk, (that intended to receive the recovery partition)  
  3. Your DVD of Windows 7. (or iso file to extract the content)

Preparation of hard disk


The disk drive must be partitioned into two. Consider a partition of about 3.5GO, at beginning of the disk, so that this partition can contain all the files from the DVD and one for the system partition.

Copying files


Once the partitions of 3 to 4 GB created, simply just copy the entire DVD on this partition, and make this partition bootable.

Prepare of the partition to make it bootable


Open the command prompt and run this :

x: 

cd /boot  

bootsect /nt60 X:

(x being your partition)
 

A message "boot code was successfully updated on all targeted volumes" should appear.
Then check that the partition is marked "active" in disk management.
If necessary, right click on the partition and "mark partition as active"

Now mount the HDD in the PC and boot.
  • The PC will automatically launch the installer from the partition and add an entry "Windows setup" in the entries in bcd. (so no need to use third party software to edit the boot entries)
  • Everything is done automatically!
  • You now have a PC with a recovery partition that lets you reinstall new Windows 7 in case of problems.

Note


This is a trick that has been created and verified using the full version, and Home Premium
7.7600 RTM of Windows.

18 July 2010

Windows 7 DVD (Multi-Brand/Multi-Edition) Activation

Windows 7 DVD
(Multi-Brand/Multi-Edition) Activation







Win7 iso can be customized and activated by various methods such as
using DISM to customize the iso adding serials, drivers, updates, etc
... or $oem$ methods can be used to copy files or add certain features
... personally, I use a combination of both to customize my Win 7 iso.



For those who just want to take their Win7 iso, and have it activate,
with brand logos, then $oem$ method and perhaps RUNONCE
method (if loader necessary) is all that is needed.



Brands



* Acer; Advent; Alienware; Asus; BenQ; Casper;

* Compaq; Dell; Exper; Founder; FSC; Fujitsu;

* Gigabyte; Haier; Hasee; HCL; HP; Jooyon;

* Lenovo; LG; Medion; MSI; NEC; Nokia;

* Quanmax; Samsung; Sony; Tongfang; Toshiba;

* Trigem; Viliv; Wortmann




Editions



* Starter; Basic; Home Premium; Pro; Ultimate



**************************************************



Description 1


* if you have slic 2.1 bios ... and don't want loader files added



Download Link 1


* updated 18-07-2010 with :-

auto detect-install Branded
Themes/Logon-off/Wallpaper/UserAccount Pictures


added "Theme_Default.txt" to allow force install of custom
Theme/Logos/Etc








File: AIO-Win7-DVD-Activation-[2.1bios-only].7z

CRC-32: 382ff8aa

MD4: 8231d954d5ea40f36fa3b31dee0c1e7c

MD5: 5e95a16539b1f46fc181b66e130de974

SHA-1: a2e1a8f320534a8547dd5928f2a41a1a4766bb8e

SIZE: 4.51mb



If you download this file and extract it, and place the $oem$ folder in
the "sources" folder of your iso, and delete the "ei.cfg" file from the
same "sources" folder and rebuild iso .. then during install you will
have option to choose the edition of win7 you want to install (ie.
Starter; Basic; Home Premium; Pro; or Ultimate) ... if you don't delete
ei.cfg file, that's OK, just means Ultimate will install by default.



The files in the $oem$ folder are silently added during install, and
silent command checks for the edition you installed and the bios brand,
and applies oem theme, logon-off, user account image, logos, cert, and
serial for that brand ... (if your brand has no "leaked" serial for the
edition installed, then Asus serial is used). During installation,
pop-up box requesting serial will not appear.



When you get to Desktop, and look in system properties ... your brand
logo should be displayed, and activated.

Desktop Wallpaper and logon-off images should all be manufacturer brand
of your PC.



IMPORTANT:- The PC you are installing on, must have a slic 2.1 bios for
this method to work.



**************************************************



Description 2


* if you don't have slic 2.1 bios ... and want loader files added



Download Link 2

* updated 14-07-2010







File: AIO-Win7-DVD-Activation-[incl.Loader].7z

CRC-32: 638f4aaa

MD4: ab65e427be208cab0fa2cf868445eacd

MD5: 465a24d7ff51ae393f3b8d22c4000fa4

SHA-1: ef8cdd368af84b49d2be72959b78f5f4b5eca623

SIZE: 1.44mb



Add $oem$ folder and delete ei.cfg (optional); as above ...



brand logos applied [not themes], but files check for activation, and if
not activated, instructs the file "setpref.exe" in the "scripts" folder
to run, at runonce, and apply loader (UAC is disabled to avoid pop-ups,
and setpref.exe will self delete after it runs) ... if specific brand
detected, then loader will apply logos and loader specific to brand, if
not detected, then Asus loader will be applied.



NOTE:- The PC you are installing on does not need to have a slic 2.1
bios for this method to work, if it happens to have slic 2.1 bios, then
it will activate without Loader, if not, Loader will apply.



**************************************************



Description 3

* if you don't have slic 2.1 bios ... and want Daz Loader added



Download Link 3

* updated 17-07-2010 // incl. Daz Loader v1.8.8







File: AIO-Win7-DVD-Activation-[incl.Daz_Loader].7z

CRC-32: 64c943bd

MD4: f665b75ae1bdcaadabd9139fd61e34ce

MD5: 4b55bd203d42003ff5cc3ab8a556fc39

SHA-1: 3e27a7f86479c38069f72b79b4ca91206b8f2e46

SIZE: 1.87mb



Add $oem$ folder and delete ei.cfg (optional); as above ...



as several folks have requested a method to incorporate "Daz's Loader"
... I have included this option ...

same as above happens, but files check for activation, and if not
activated, instructs the file "Windows Loader.exe" in the "scripts"
folder to run, and apply Daz's Loader ... if specific brand detected,
then loader will apply specific brand, if not detected, then Asus loader
will be applied ... "LOGO.exe" will autorun to apply brand logo, and
then self delete ... UAC is disabled to avoid pop-ups ... all actions
are silent.



NOTE:- The PC you are installing on does not need to have a slic 2.1
bios for this method to work, if it happens to have slic 2.1 bios, then
it will activate without Daz Loader, if not, Daz Loader will apply.



**************************************************



Test Results




I have ran a few test installs in VMWare for different brands, and also
in VM with no modded bios, and not received any errors.

Tests with various bios mods activated with appropriate logos and
serials, and VM with no bios mod installed with Asus Loader,logo &
serial.



**************************************************



Thanks to :-



Daz ...

* for providing useful info regarding switches etc.



MasterDisaster &
Butterfly_Joe
...

* for posting useful scripting info.



tcntad ...

* for testing brands in vmware & backup download mirror searchengine.txt



cyclops ...

* for testing brands in vmware & backup download mirror AIO-Win7-DVD-Activation-[2.1bios-only].7z



17 July 2010

Windows Hacks Comparison Chart




This is meant to be a non-partisan thing so I'm just going to post
the chart and the threads they are associated with. I would like to
thank all the developers which helped create this chart by providing the
info I needed. If your hack is not seen in the chart then its not
because I'm insulting you its just that my bubble of known hacks is just
too small


Current Chart Revision ---------- 7 A

Current Chart Being Done ----- 8 A



Windows Hacks Comparison Chart Rev 7A


11 July 2010

Make PE3 Program to Create Portable Windows 7 PE

You can Run Make_PE3.cmd and Make_PE3.exe in XP or Windows 7 environment.

Required as Source - Drive where 32-bits Windows 7 is Installed - Or Folder with content of such drive

32-bits Windows 7 Setup DVD can be used as well as Source, but requires for XP to auto-collect AIK_Tools,
by Running once Make_PE3 in Windows 7 Or in environment with Installed Windows 7 AIK
AIK_Tools folder in Make_PE3 is the place where used tools as Dism.exe and imagex.exe are collected.

64-bits Windows 7 is also supported as source, but requires still some improvement in the Windows 7 PE registry

Without AIK you can use Make_PE3 to make in about 4 minutes 7pe_x86.iso
from Winre.wim in Recovery folder and by using Dism.exe of Windows 7 Source Drive
Thanks to tsetya for publishing this easy way to create Windows 7 PE
http://www.boot-land...showtopic=11801

7pe_x86.iso = Win7 Recovery ISO with Windows 7 GUI , and made from Winre.wim or boot.wim and without AIK
pe3_x86.iso = AIK Windows PE 3.0 with Windows 7 GUI , and made from winpe.wim by using AIK

Portable Windows 7 PE is a bootable ISO with size of about 200 MB
The Boot ISO files are made by adding to boot.wim about 700 files and some registry settings of Windows 7

BOOT_IMG.exe can be used to install the ISO files as boot option in grub4dos Menu on HDD or USB
Moreover, Make_USB.exe of U_XP_SET package can be used to create bootable USB-stick with Portable Windows 7 PE Download

*** Install from USB AFTER Booting with PE *** Install from USB without Booting from USB by using U_XP_SET

0. Introduction

Install of XP from USB involves:
  • Boot in 30 seconds with LiveXP Boot Image from RAMDISK loaded in few seconds from HD (preferred) or from USB in 5 minutes
  • Run USB_XP_Setup.exe and select and Quick Format your Target Drive on which you want to Install XP
  • Select your XP Setup Source folder and LiveXP Boot Image file and use GO to prepare Target Drive for Install of XP
  • Reboot Computer from Target Install Drive and Select XP Setup from boot.ini Menu
  • Proceed as usual with TXT-mode and Reboot for GUI-mode of Unattended XP Setup

To perform the above requires some preparation:
  • Prepare XP Setup Source Folder and Live XP Boot Image file as described in Tutorial in Sections 2 and 3
  • Use Make_USB.exe so that your USB-stick or USB-Harddisk contains XP Setup Source folder and U_XP_SET folder and LiveXP Boot Image file
  • Run BOOT_IMG.exe to Install LiveXP Boot Image file as boot option on C-BootDrive of Harddisk

For blank HDD you need to create first an Active Primary NTFS partition:
  • Use Make_USB.exe to make USB-stick having XP Setup Source and being bootable with LiveXP
  • Use BOOT_IMG.exe to make USB-stick also bootable with Parted Magic 4.6 (See Section 6)
  • After booting from USB-stick with Parted Magic from GRUB4DOS menu, you can create Primary NTFS partition using GParted
  • Reboot from USB-stick with LiveXP PE and Set Active the created Primary NTFS partition using Disk Management
    In LiveXP you must fix the MBR of your HDD using MBRFix.exe (in makebt folder),
    since Parted Magic will not create the required MBR bootcode to make drive bootable
    If your HDD is drive 0 then in cmd window opened at makebt folder run:
    CODE
    MbrFix /drive 0 fixmbr
  • Run USB_XP_Setup.exe to Quick Format TargetDrive and prepare HDD for Install of XP
  • Reboot from HDD for Install of XP and continue as usual with TXT and GUI mode of XP Setup
    (change BIOS settings to boot from HDD if needed)

================================================================================

1. Install of XP using USB_XP_Setup.exe

The package U_XP_SET contains Folder USB_XP_Setup with 3 Programs, which you can Launch via PStart.exe Menu
  • Make_USB.exe can Copy your XP Source to USB-Drive and can make it Bootable with LiveXP for Emergency
  • BOOT_IMG.exe Copies WinBuilder LiveXP Boot Image file to C-Harddisk or USB-Drive
    and makes Entry for boot.ini Menu and GRUB4DOS menu.lst for Booting with LiveXP PE from RAMDISK.
    This is useful as Escape Boot Option in case Booting with Windows XP or XP Setup may fail,
    so that you can Repair your System or use Ghost for System Backup and System Restore.
  • USB_XP_Setup.exe can make XP Setup BootFolder $WIN_NT$.~BT on Install-Drive usually C:
    and will specify in TXTSETUP.SIF where to find the FULL XP Source on partition 1 of USB-Stick.
    For all other cases of Install of XP e.g. from any Harddisk folder or Network Shared folder or from CD / DVD disk,
    then the XP Source is always Copied to $WIN_NT$.~LS folder on Target Install-drive.
  • =

    =

    =

    Before you Start to Install XP:
  • Prepare XP Source Folder and Live XP Boot Image File as described in Sections 2 and 3
  • Vista as OS requires to turn User Account Control OFF (only needed for the old Batch cmd Programs)
  • Run the SFX SelfExtractor U_XP_SET.exe and use Extract to the Root of your Workstation Harddisk
    In this way you will get on your Local Harddisk the folder U_XP_SET with PStart.exe to launch the 3 Programs
  • Copy Winbuilder\Workbench\Common\BootSDI\setupldr.bin and ramdisk.sys to USB_XP_Setup\makebt\srsp1 folder
  • Run Make_USB.exe and Select and use as Target Drive a FAST USB-stick (e.g. Corsair Flash Voyager 4-8 GB)
  • Use Format Stick button or HP Format Tool to format Target USB-stick with NTFS FileSystem (Fastest for FileCopy)
  • Select your XP Source Folder and LiveXP Boot Image File and Enable Copy of U_XP_SET Folder to Make your USB-stick
  • Run BOOT_IMG.exe to Copy WinBuilder LiveXP Boot Image file to C-BootDrive of Harddisk
    and make Entry for boot.ini Menu and GRUB4DOS menu.lst for Booting with LiveXP PE from RAMDISK.
    This is also useful as Escape Boot Option in case Booting with Windows XP or XP Setup may fail,
    so that you can Repair your System or use Ghost for System Backup and System Restore.

The XP Setup Procedure for Fresh Install of XP:
  • Connect USB-Stick having XP Source in partition 1 (Connect before Booting with LiveXP from HDD) or use any other XP Setup Source.
  • Remove All Other USB-Drives like CardReaders and USB-Harddisks
  • Reboot from C-Harddisk and Select to Boot from RAMDISK with LiveXP
  • Run USB_XP_Setup.exe and Quick Format with NTFS your Selected Target Install-Drive usually C:
  • Use GO to make XP Setup BootFolder $WIN_NT$.~BT on Target Install-Drive.
    First give XP Setup Source Path and give LiveXP RAM BootSDI IMAGE File.
    So in case when XP Setup fails, you have LiveXP as Escape Boot Option available on your Fresh Formatted Install Drive.
    XP Source not on USB-stick is always Copied to $WIN_NT$.~LS folder on Target Install-drive.
  • If you Install on other than Active C-drive, then Use Disk Manager to Activate Install Drive Partition
  • Reboot Computer from Install Drive and Select XP Setup from boot.ini Menu
  • Proceed as usual with TXT-mode and GUI-mode of Unattended XP Setup
    In TXT-mode after FAST loading drivers the blue screen becomes black and
    then one needs to wait sufficiently until the blue screen with the Drive Partition List appears.
    Select the Install Partition usually C: and Auto proceed with FileCopy and Reboot for GUI-mode of XP Setup.
    WARNING
    Don't Delete the Install Partition, just Install on this previously in PE Quick Formatted NTFS Partition.
    Changing the Partitioning is a task which is done in LiveXP PE Environment with
    7Tools Partition Manager 2005 of Paragon ( Preferred ) or Acronis Disk Director 10.

The advantage of the present technique is that there are no changes needed in the BIOS Setting.
Booting for XP Setup occurs all the time as normal from the C-Install Drive if you Install on C-Drive.
Thus the USB-stick does not need to be bootable and it is not needed that the motherboard supports booting from USB.
In the case of total computer disaster it can still be handy to boot with LiveXP from USB-drive.

Another advantage is that you can use the FULL XP Source unchanged just as with Install from CD
and the $OEM$ folder is recognised and the [Unattended] section of winnt.sif file is used as normal.
Moreover USB_XP_Setup.exe allows to Select from different XP Sources on USB-Drive to be used for XP Setup.
Supports the use of BTS DriverPacks located in OEM Folder in XP Source Folder on USB-Drive
http://driverpacks.net/downloads

Install XP from USB AFTER booting with PE does not make use of WINNT32.EXE
In fact the only thing I do is Create the XP BootFolder $WIN_NT$.~BT of only 12 MB on the Install Drive
by parsing dosnet.inf and to specify in TXTSETUP.SIF where to find the FULL XPSOURCE.
In this case the XP Setup Source Folder must be on USB-stick.
For all other cases of Install of XP e.g. from any Harddisk folder or Network Shared folder or from CD / DVD disk,
then the XP Source is always Copied to $WIN_NT$.~LS folder on Target Install-drive.

Thanks to ilko_t I have learned how to use SetupSourcePath and SetupSourceDevice
to specify in TXTSETUP.SIF where to find the XP Source Folder, thus enabling
Alternative location of Setup files when installing from HD media
  •  

Jerry blogger: GIMP for Windows

GIMP for Windows

GIMP for Windows







The GIMP team doesn't officially provide any Windows binaries. You
can,
however, install GIMP easily using the Windows installers by Jernej
Simončič
.


Download
GIMP 2.6.9
– Installer for Windows XP SP2 or later







It has many capabilities. It can be used as a simple paint program,
an expert quality photo retouching program, an online batch processing
system, a mass production image renderer, an image format converter,
etc.


Full suite of painting tools including brushes, a pencil, an
airbrush, cloning, etc.
Tile-based memory management so image size is limited only by
available disk space
Sub-pixel sampling for all paint tools for high-quality
anti-aliasing
Full Alpha channel support
Layers and channels
A procedural database for calling internal GIMP functions from
external programs, such as Script-Fu
Advanced scripting capabilities
Multiple undo/redo (limited only by disk space)
Transformation tools including rotate, scale, shear and flip
File formats supported include GIF, JPEG, PNG, XPM, TIFF, TGA, MPEG,
PS, PDF, PCX, BMP and many others
Selection tools including rectangle, ellipse, free, fuzzy, bezier
and intelligent
Plug-ins that allow for the easy addition of new file formats and
new effect filters

Office 2010 Key Checker

here is a key checker for Office 2010

the included .xrm-ms and pidgenx.dll are from office 2010 proplus VL RTM

Download

8 July 2010

AutoPager: Version 0.6.1.16 Release.

AutoPager: Version 0.6.1.16 Release. Rewrite most of the code to make it works on both Firefox, Google Chrome and Fennec. Improve AutoPager Lite. And allow other scripts to integrate with AutoPager. You can find more info here. Improve ajax support. Refer to http://member.teesoft.info/bugzilla/show_bug.cgi?id=48 for detail. AutoPager will now re-support ajax mode google now. I hope google not change their layout to anti autopager recently.

What to do if your Windows is shutting down every 2 hours.

You are most likeley running Windows 7 pre RTM, meaning a non final copy of windows.

THERE IS NO WAY TO STOP THIS SHUTDOWN. YOU MUST INSTALL RTM.

RTM download links:
http://www.mydigitallife.info/2009/0...-iso-download/

Either that or you downloaded the Enterprise trial from Microsoft.

The only way to disable the timebomb in that would be to use RemoveWAT (at the moment, anyways).

6 July 2010

Rumor About windows-7 tweaker

Up to now, there is no such program call windows-7 tweaker. A program call "SSD  Tweaker" is recommended. Download Link could be found in this board.

4 July 2010

"God KEY" representation to help you activate the MSDN Office Professional Plus 2010

WORKS ON JULY 4TH, 2010
The day before yesterday to share theOffice Professional Plus 2010 (Chinese Simplified / Traditional / English) MSDN official version download, download and install the first step in the need to enter the product key, since no key leaks out, causing can not be installed today in the online office 2007 found an input validation key can be used to complete the installation activation MSDN Office 2010! In this share friends!

office 2010
Office 2010 key (serial number):

GCXQJ-KFYBG-XR77F-XF3K8-WT7QW
QY89T-88PV8-FD7H7-CJVCQ-GJ492
23TGP-FTKV6-HTHGD-PDWWP-MWCRQ
GDQ98-KW37Y-MVR84-246FH-3T6BG
FGVT2-GBV2M-YG4BD-JM823-XJYRY
TTWC8-Y8KD3-YD77J-RGWTF-DTG2V
GFWF2-R8H99-P4YWF-D2HY9-6PPXJ

(KEY have friends over after directly activated! Not adopted in accordance with the following action to activate! June 23 update KEY)

Prior to use and share over theexperience of sharing: Use windows 7 keys + phone successfully activated windows 7 systemsimilar;

Note:

Installedoffice 2010MSDN must be original;

Specific activation methods:

Upon completion of the installation of Office Professional Plus 2010, it will enter the key into the interface:

office 2010激活破解

Enter key in the box, on the try-line activation, choose or not choose Jieke have already activated a precedent! Click Enter key to continue, until the installation is complete, and then start a office component, if not pop up the activation wizard, you're in office 2010 have been directly activated, if the Activation Wizard pops up, you need to activate in accordance with the following steps:

1, the Activation Wizard page select "I want to activate by phone software", as shown:

office 2010激活破解

2, "next" after the phone activation page first select "China", and then call toll free (recommended third: 4008203800), as shown:

office 2010激活破解

3, dial the phone directly to press 2. Then:

Select Mandarin service: press 1;

Need to activate the Microsoft product is purchased in retail stores and has pre-installed on computers: press 1;

For the product installation password, enter the installation ID can image above (points 9 input, each 6);

Enter a question after the completion of:

(1) "is not in the same machine to re-install the system?" - Choose "Yes" or "1";
(2) "is not already uninstalled the previous installation?" - Choose "Yes" or "1."

- Do not try to manually activate

And then will activate the serial number (ie image above to enter the confirmation ID) available to you (points 8 to this, each time 6), be sure to listen carefully! Note the chart after the input box, the "Next" to achieve activation, as shown:

office 2010 ACTIVE
If done correctly, 100% can be activated in the activation process be careful not to copy the wrong error ID, as a result of operational errors refused to activate the ID, Microsoft's activation server will note the "hardware hash information" which led to not use this KEY Activate! Can try to disable some computer hardware drivers (such as network cards, graphics) to re-activate the phone!

Comparison of alternative current installation steps (input key to install), so relatively simple activation method, the other a "substitution" because to replace the program files, so do not share!

In the near days, Microsoft will release a version of office 2010 large customers (VOL Edition), by the time when you can use the "KMS activation" and "MAK key," activation of two ways to activate! Anyway, we eventually must be able to successfully install and activate the Office 2010 version!

1 July 2010

Windows Loader v1.8.4 (both software and hardware base supported)

Windows Loader v1.8.5
The easy and safe way to activate Windows.




Download
 download v1.8.5.zip
 
About



This is the loader application thats used by millions of people worldwide, well known for passing Microsoft's WAT (Windows Activation Technologies) and is arguably the safest Windows activation exploit ever created. The application itself injects a SLIC (Software Licensing Description Table) into your system before Windows boots, this is what fools Windows into thinking it's genuine.


Features
  • Can be run as a standalone application
  • Works well with all system languages
  • Argument support for silent installs
  • Can be used for pre-activation
  • Application integrity checking
  • Custom error handling
  • Support for hidden partitions and complex setups
  • Can work alongside Linux's GRUB or any other boot manager
  • Works with TrueCrypt and many other types of hard drive encryption applications
  • Add your own certificates and serials externally
  • Offers certificate and serial installation only for users with an existing SLIC 2.1
  • Automated system profiling (The application matches everything up for you)

The rundown
  • This will run on x86 and x64 systems ✔ check
  • This can activate all Windows versions at the same time, just install it on each ✔ check
  • No core system files get modified ✔ check
  • No extra processes are run so you have nothing eating at your RAM ✔ check
  • All key parts of the exploit are encrypted with a custom encryption ✔ check
  • The exploit runs before Windows so it's harder for Microsoft to prevent ✔ check
  • The exploit patches all necessary tables making activation look authentic ✔ check
  • The application will select the best profile for your system during installation ✔ check
  • Each and every user has a unique version of the exploit installed on his/her system ✔ check

Supported operating systems
  • Windows 7 Ultimate
  • Windows 7 Professional
  • Windows 7 Home Premium
  • Windows 7 Home Basic
  • Windows 7 Starter
  • Windows Vista Ultimate
  • Windows Vista Business
  • Windows Vista Business N
  • Windows Vista Home Premium
  • Windows Vista Home Basic
  • Windows Vista Starter
  • Windows Server 2008 R2: Enterprise
  • Windows Server 2008 R2: Standard
  • Windows Server 2008 R2: Foundation
  • Windows Server 2008: Enterprise
  • Windows Server 2008: Standard
  • Windows Server 2008: Foundation
  • Windows Small Business Server 2008
Note: You must be running build 7600 or greater for Windows 7 and Windows Server 2008 R2.
Note: Windows 7 N and E editions will only be supported when OEM SLP serials leak for them editions.


Application integrity checking?

Hover your mouse over the green, amber or red icon to see detailed application information.

Note: Even if the icon is green someone might have found a way around the protection system so it's worth checking that the applications path is always the same as the location from which you launched the application. You should also check that the MD5 matches the MD5 found online.


Download
 download v1.8.5.zip
--
Version 1.8.5 changes (06/29/2010):
* Fixed a bug that caused upgrading to fail when "preserve current boot code" was selected
* Added a new GRLDR version
* Added Alienware serial (Professional)
* Other minor tweaks and fixes

--

MD5: ea38db1a078d62438e7f65d3af452261
SHA-1: 2c641e1f00f4f360553cbe57f6051665f838e92e